Taurus Raging Hunter .500 S&W Magnum Revolver

The Taurus Raging Hunter .500 S&W Magnum revolver is built for shooters who need authoritative stopping power on big game hunts across U.S. territories or demand a robust platform for high-pressure range sessions. This two-tone, 6.75-inch barrel variant is designed to handle the formidable .500 S&W Magnum cartridge, making it a practical choice for hunters pursuing large or dangerous game in states like Alaska, Montana, or Texas. As a licensed FFL retailer, we recognize this revolver as a specialized tool for experienced shooters who value reliability and control over raw energy.

What This Product Is and Who It’s For

The Taurus Raging Hunter is a large-frame, double-action/single-action revolver chambered in .500 S&W Magnum. It is not a general-purpose sidearm; it is intended for shooters who need a heavy-caliber revolver for specific tasks. This model suits target shooters looking for a challenging platform to master recoil management, hunters who require one-shot confidence on elk, bear, or wild boar, and collectors interested in modern high-caliber revolver engineering. Home defense is not a primary use case due to the cartridge’s overpenetration risk and recoil profile, but experienced owners may consider it for rural property protection. The revolver is also a strong contender for metallic silhouette shooting or other handgun competitions where power factor matters.

Key Specifications

• Caliber: .500 S&W Magnum (also accepts .500 S&W Special)
• Capacity: 5-round cylinder
• Barrel Length: 6.75 inches
• Overall Length: Approximately 12.5 inches
• Weight: Roughly 55 ounces (unloaded)
• Finish: Two-tone—matte stainless steel cylinder and barrel with a black oxide-coated frame
• Sights: Adjustable rear sight (windage and elevation) with a red fiber optic front sight
• Frame: Large-frame steel construction with a ported barrel and compensator
• Grip: Soft rubber with a cushioned backstrap for recoil management
• Safety: Transfer bar mechanism with a manual hammer block
• Action: Double-action/single-action with a smooth, heavy trigger pull

Feature Deep-Dive

The Taurus Raging Hunter’s two-tone finish is not purely cosmetic. The black oxide-coated frame reduces glare in field conditions, while the matte stainless steel barrel and cylinder resist corrosion from humidity or sweat during long hunts. This combination offers practical durability without adding unnecessary weight or maintenance steps. The finish is applied evenly, with no sharp edges that could snag on holsters or gear.

The 6.75-inch barrel includes a built-in compensator with three ports on the top of the barrel. This design redirects propellant gas upward, reducing muzzle rise and allowing for faster follow-up shots. The compensator is integral to the barrel, meaning it does not require threading or aftermarket installation. This is a key feature for managing the .500 S&W Magnum’s recoil, which can exceed 2,000 foot-pounds of energy. The ported design also helps keep the muzzle on target during rapid double-action strings.

The cylinder is machined from a single piece of stainless steel, with a five-round capacity that balances power with cylinder wall thickness. The cylinder gap is tight, minimizing gas loss and improving velocity consistency. The cylinder release is located on the left side of the frame, typical for Taurus revolvers, and operates with a positive click. The revolver uses a transfer bar ignition system, which prevents firing unless the trigger is fully depressed, adding a layer of drop safety.

The soft rubber grip is designed to absorb a portion of the recoil impulse. It features a cushioned backstrap and finger grooves that promote a consistent high-hand hold. The grip is not interchangeable with other Taurus models, but the ergonomics are tailored to the Raging Hunter’s frame. The trigger guard is large enough to accommodate gloved fingers during cold-weather hunts. The double-action trigger pull is factory-set at around 10 to 12 pounds, while single-action breaks at a cleaner 4 to 5 pounds.

The adjustable rear sight has a flat, serrated face to reduce glare, and the red fiber optic front sight provides quick acquisition in low-light conditions. The front sight is dovetailed into the barrel and can be replaced with aftermarket options. The rear sight is protected by small ears on the frame, which also serve as a mounting base for a scope if you choose to add a rail system. The revolver is drilled and tapped for a Taurus-specific scope mount, though this is not included.

The frame is made from forged steel, with a full underlug barrel that adds weight forward to further dampen recoil. The barrel is cold hammer-forged for consistent rifling, and the chamber is polished to ease extraction of spent casings. The revolver’s finish is resistant to light scratches and holster wear, though it will show signs of use over time. The overall construction is robust, with no plastic components in the trigger or lockwork.

Ideal Use Cases

• Big Game Hunting: The .500 S&W Magnum is effective on bear, elk, moose, and wild boar at distances up to 100 yards. The 6.75-inch barrel provides enough velocity for expanding bullets to perform reliably. The ported design helps keep the muzzle on target for a second shot if needed.
• Range Practice: Shooters can use lighter .500 S&W Special loads for lower-recoil training. The revolver’s weight and grip make extended sessions manageable for experienced shooters.
• Metallic Silhouette Competition: The adjustable sights and consistent trigger allow for precise shot placement on steel targets at 50 to 100 meters. The revolver’s power factor meets major competition requirements.
• Rural Property Defense: In areas where large predators are a concern, this revolver offers a high level of deterrent. It is not recommended for indoor use due to noise and overpenetration.
• Collection: As a modern high-caliber revolver with a distinctive two-tone finish, the Raging Hunter holds interest for collectors focused on Taurus or large-bore handguns.

Compatibility Notes

Ammunition: This revolver accepts .500 S&W Magnum and .500 S&W Special cartridges. Do not use .500 S&W Magnum loads in firearms not specifically chambered for it. The revolver cycles both jacketed and lead bullet profiles, but heavy cast loads may require a lighter crimp for proper chambering. We recommend using factory ammunition from reputable U.S. manufacturers like Hornady, Federal, or Winchester.

Holsters: Due to the 6.75-inch barrel and compensator, standard holsters are not compatible. Look for holsters specifically made for the Taurus Raging Hunter with a 6.75-inch barrel, such as those from Simply Rugged or Diamond D Custom Leather. Paddle holsters or belt holsters with a thumb break are common options for field carry.

Magazines and Accessories: This is a revolver, so no magazines are used. Speedloaders for .500 S&W Magnum are available from HKS or Safariland. A scope mount rail is available from Taurus or aftermarket sources, and we recommend a low-profile red dot or a 2x pistol scope for hunting. The revolver does not accept standard suppressor attachments due to the integral compensator.

Spare Parts: Replacement grips, screws, and springs are available through Taurus customer service or authorized parts distributors. The fiber optic front sight rod can be replaced with standard 1mm rods.

Frequently Asked Questions

Q: Can you ship this revolver to my state?
A: We ship to all U.S. states where the Taurus Raging Hunter .500 S&W Magnum is legal. This includes most states except those with specific restrictions on large-caliber handguns or magazine capacity (though this revolver has no detachable magazine). California, New York, and Massachusetts have additional requirements; we will verify compliance before processing. Contact us with your ZIP code for a state-specific check.

Q: How does the FFL transfer process work?
A: After you place your order, we will contact you to confirm your chosen Federal Firearms License (FFL) dealer. You must provide the dealer’s name and address. We ship the revolver to that dealer via a licensed carrier. You then complete the ATF Form 4473 and a background check at the dealer’s location. We do not ship to residential addresses. The dealer may charge a transfer fee, which is not included in our price.

Q: What ammunition can I safely use in this revolver?
A: This revolver is designed for .500 S&W Magnum cartridges with factory-spec pressures. You can also use .500 S&W Special ammunition, which has lower pressure and recoil. Do not use .500 S&W Magnum ammunition marked for “Ruger only” or “T/C only,” as these loads may exceed SAAMI specifications. Always check the cartridge headstamp before loading. We recommend starting with factory ammunition from major U.S. brands.

Q: What is the warranty on this Taurus revolver?
A: Taurus offers a limited lifetime warranty to the original purchaser for defects in materials or workmanship. This covers the revolver’s frame, barrel, cylinder, and internal parts. The warranty does not cover damage from misuse, improper ammunition, or unauthorized modifications. To file a claim, contact Taurus customer service with your serial number and purchase receipt. We are an authorized Taurus dealer and can assist with warranty issues.

Q: Can I return this revolver if I change my mind?
A: Due to federal regulations and safety concerns, we do not accept returns on firearms once they have left our facility. All sales are final. If the revolver arrives with a manufacturing defect, we will work with Taurus to facilitate a warranty repair or replacement. Please inspect the revolver at your FFL dealer before accepting the transfer. If you refuse the transfer, the revolver will be returned to us, and you will be responsible for shipping and restocking fees.

Closing Call to Action

This Taurus Raging Hunter .500 S&W Magnum revolver is available for shipment to your chosen U.S. FFL dealer. We handle all necessary compliance checks and ship within one to two business days after your FFL information is confirmed. For questions about availability, caliber selection, or to place an order, contact our team directly. We serve customers across all 50 states where this firearm is legal.